GE refrigerator repair service Chicago

Monday, August 10th, 2015

GE refrigerator repair chicagoGE fridge customer says its not cooling properly and there’s a lot of frost build up in the freezer. After making some checks found a busted bimetal tstat causing the fridge not to cool like its suppose too. Thawed out the evaporator installed new bimetal tstat and now the fridge is starting to cool properly.

Refrigerator repair tips

Thursday, July 23rd, 2015

GE refrigerator repair Refrigerator – Not Cold enough

If the refrigerator is not running

Check to see if there is power to the refrigerator. Make sure the plug is effectively sitting in the socket and the temperature level control is resorted to the “on” position.

Inspect the temperature level control settings.
For Dial or Digital Readout Versions, readjust your temperature level control by one number higher for a cooler temperature setup.

For Actual Temperature level Readout Designs, readjust your temperature level control by one degree reduced for a reduced temperature setting.

Make certain that both the refrigerator and also fridge freezer include an affordable food lots. Closed containers of water, food or non-perishables will help to support the temperature. This is because the things in the refrigerator soak up the chilly, and in fact work that can help the refrigerator maintain a stable temperature, in similar means that ice cubes keep a beverage cold. When you open up the refrigerator doorway, the great air hurries out and also warm air enters.

The more things in the refrigerator, the less awesome air is needed to maintain the refrigerator cold. Consequently, when you close the door once more, the refrigerator go back to a stable temperature quicker.

See to it refrigerator as well as fridge freezer doorways can shut as well as can properly seal.

See to it the back wall surface of the fridge freezer does not have an ice accumulation.

Look for big products, such as trays, platters, food products (like pizza boxes), and ice behind the ice container that could interfere with doorway closure.

Examine to see if huge containers are placed versus the back wall surface of the refrigerator. The huge containers in back might obstruct the circulation of cold air as well as adversely affect the temperature levels in the refrigerator. Relocate the tall products so they do not block the air circulation.

Check to see if the condenser is dirty. (To minimize the opportunity of electrical shock, disconnect the device prior to trying any type of maintenance or cleansing.) When the condenser coils get filthy, the sealed system does not run as efficiently.

Make certain the refrigerator is mounted in a location where the temperature will certainly not go here 60 ° F (16 ° C) or surpass 110 ° F. Your refrigerator might not cool down generally if installed outside of these temperature varieties.

Verify that the refrigerator has appropriate air allowance. As a whole, at least 1 inch of allowance is called for on each side, leading and back of the refrigerator. Clearance needs may vary model to model. Kindly consult your owner’s individual handbook for particular needs.

Ensure the indoor lights are going off when the doors are shut. To examine many versions, close the door gradually. The light should head out when the doorway position is reduced to approximately 1 inch. If the light stays on, it could create heat that influences your refrigerator temperature.
If the above products do not repair the problem, you might should arrange service.

GE Refrigerator Repair Chicago Style

Friday, July 10th, 2015

GE refrigerator Repair Chicago GE Refrigerator Repair Chicago One

GE Refrigerator Repair One – Here’s a GE refrigerator. The complaint was that the food is starting to thaw and ice cubes are melting. When I arrived there I noticed the fans and lights were working but the compressor wasn’t running, after making a few checks found the problem to be the main control board. Installed the new control board and the compressor turned on and started cooling. Customer was happy and the day was saved!

The Challenges of Modern Appliance Repair Services

Sunday, June 28th, 2015

appliance repair serviceAppliance Repair Service has gotten quite a bit more sophisticated these past few years due to fantastic innovations in appliance manufacturing.  This refrigerator appliance circuit board was fried and so it was not cooling the food at the proper temperature.  Our repair services can tackle any hard edge modern day appliance. 

Frigidaire Stove Repair Service Chicago

Tuesday, June 23rd, 2015

GE frigidaire Stove Repair

This is a picture of a cracked glass top on a Frigidaire electric stove in the West Loop neighborhood. Before and after we replaced the new glass top GE.  It’s important to hire a professional appliance repair service that will provide you top quality replacement parts.  

Frigidaire Refrigerator Repair Service Chicago

Friday, April 17th, 2015

Frigidaire Refrigerator Repair ServiceFrigidaire refrigerator. Clogged drain line in the freezer section on the top pic and a cleared drain line on the bottom pic. Customers complaint was there’s water leaking into refrigerator section from the freezer. Cleared debris from drain line no more water leaking into refrigerator section.

Refrigerator repair tip: Leaking Water

Friday, May 30th, 2014

Kenmore Refrigerator Repair – Water leaking from the freezer – 10677292790

Repair your own Kenmore Refrigerator which has some of the following issues: Water leaking from the freezer Visit us at . Tools…

Customized Social Media Icons from Acurax Digital Marketing Agency
Visit Us On TwitterVisit Us On FacebookVisit Us On Google PlusVisit Us On YoutubeVisit Us On LinkedinVisit Us On Instagram